Brother MFC 7550MC - Manual (Page 78)

6 - 5
MFC 4550/6550MC/7550MC
OP-US-5.0
11. Press Stop , and replace the handset.
The recorded message will be played
automatically.
R E C O R D O G M : 2 0 / 2 0
P L A Y I N G O G M
F/T OGM
SELECT { } & SET 12. Press Stop to exit.
Helpful Hints It is not necessary to have an outgoing message. The F/T mode will
work fine without one. It is only to help the caller understand the
status of your machine.
RECEIVING FAXES AND OTHER CALLS
BASIC SETUP TO RECEIVE FAXES
1. Press Function .
(The MFC 4550 will skip to Step 4.)
2. Wait for two seconds.
(Only for MFC 6550MC/7550MC)
3. Press 1 .
(Only for MFC 6550MC/7550MC)
4. Press 6 .
5. Press 4 .
KEYS TO PRESS
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
O N L I N E
ENTER NO. & SET
6 . T E L O P T I O N S
1 . F A X
1 . F A X
2 . P R I N T E R
THE DISPLAY WILL SHOW:
4 . F / T R I N G T I M E
R I N G T I M E : 2 0 S E C
SELECT { } & SET
(Only for MFC
6550MC/
7550MC)
(Only for MFC
6550MC/
7550MC)
Setting the F/T Ring Time
You can specify the maximum time you want the machine to ring (double ring) to
notify you after it has answered a telephone call. There are four predefined settings:
10, 20, 30, or 60 seconds. During this time, only the MFC will ring. No other phones
on the same line will ring.