Brother MFC 7550MC - Manual (Page 99)

6 - 2 6
MFC 4550/6550MC/7550MC
OP-US-5.0
Receive
FAX
2. Wait for two seconds.
(Only for MFC 6550MC/7550MC)
3. Press 1 .
(Only for MFC 6550MC/7550MC)
4. Press 6 .
5. Press 6 .
6. Press Z (left arrow) or X (right arrow)
to find the SET mode.
7. Press Set .
8. Press Stop .
NOTE: The display should say D/R SET
MODE . Also, the answer mode
lights will flash. You must now
wait for someone to call the
distinctive ringing fax number.
9. When the phone rings, listen carefully to
check that the ringing pattern is the one
you want to register. If it is, wait (at least
two ring cycles) until the display says
PICK UP TO SET . Then pick up the fax
handset.
10. Press Start to set.Check that the display
says REGISTERED .
(If the other number was called, press
Stop to cancel.)
11. Press Start again to receive the incoming
fax, or if the call is a voice call, talk into
the handset.
D I S T I N C T I V E : S E T
6 . D I S T I N C T I V E
D/R SET MODE
O N L I N E
6 . D I S T I N C T I V E
D I S T I N C T I V E : O F F
SELECT { } & SET
1 . F A X
2 . P R I N T E R
1 . F A X
6 . T E L O P T I O N S
PICK UP TO SET
START TO SET
STOP TO CANCEL
R E G I S T E R E D
T E L E P H O N E / F A X
O N L I N E
(Only for MFC
6550MC/
7550MC)
(Only for MFC
6550MC/
7550MC)
DISTINCTIVE RINGING
RECEIVING FAXES AND OTHER CALLS