Brother MFC 7550MC - Manual (Page 142)

9 - 2 0
MFC 4550/6550MC/7550MC
OP-US-5.0
F) PAGING/FAX FORWARDING
What Is Paging/Fax Forwarding?
Message Center mode provides the additional option of either Paging or Fax
Forwarding after voice and fax messages have been received into the memory.
How paging works (Paging on) How fax forwarding works (Fax Forward on)
NOTICE
1. You can activate only Paging or Fax Forwarding; they are very similar
features and can not be used simultaneously.
2. The Paging feature can be used in the limited modes of the Message
Center, since it will page based upon receipt of messages into the
memory.
3. If Paging is ON, you will be paged every time a voice or fax message is
received into memory.
Incoming voice or fax
Paging function is activated.
The fax is stored in the Message
Centermemory.
Fax Forwarding function is activated.
The machine sends stored fax from the
memory to the forwarding location.
The MFC will dial the registered
pager telephone number.
Once connected, the MFC dials
your registered PIN number.
(Personal ID number).
Your personal pager is activated.
Once connected, the machine sends
fax tones to another fax machine.
The voice or fax message is stored
in the Message Center memory.
The registered Fax Forwarding
number is dialed.
Incoming fax
MESSAGE CENTER MODE SETTINGS
PAGING/FAX FORWARDING