Brother MFC 7550MC - Manual (Page 144)

9 - 2 2
MFC 4550/6550MC/7550MC
OP-US-5.0
10. Enter a PIN (Personal Identifica-tion
Number), #, press Redial/Pause key your
MFC telephone number, and ##.
Example: 12345#-19085551234## .
-If you do not use a PIN, you must enter
the telephone number of your MFC. Press
Redial/Pause key before entering your
fax number and add ## at the end.
Example: -19085551234##
11. Press Set .
12. Press Stop to exit.
5 # - 1 9 0 8 5 5 5 1 2 3 4 # #
3 . F A X F W D / P A G I N G
- Paging number and PIN can not be changed remotely.
- Redial/Pause appears as a hyphen on the display.
The PIN (Personal Identification Number) you enter depends upon the
type of paging company you use. There are generally two types of paging
companies...
1) Satellite Pagers: In this case we recommend you enter your actual
satellite PIN# plus your return MFC telephone/fax number/or special
alpha message.
PIN# Return# PIN# Alpha Message
For Example: 12345#19085551234## or 12345#329329329##
FAXFAXFAX
2) Radio Pagers: Most* radio pagers do not require a PIN #, and in this case
you should use the PIN # in the MFC only for the return number or
special alpha message.
Return# Alpha Message
For Example: 19085551234## or 329329329##
FAXFAXFAX
* If your radio pager utilizes a PIN # then use the satellite sequence
above.
The “##” symbols at the end of the special message (or return #) are used
to signify the end the PIN #/Message.
{
{
{
{
{
{
{
{
FOR YOUR INFORMATION
MESSAGE CENTER MODE SETTINGS
PAGING/FAX FORWARDING