B&B Electronics Network Device I-7011 - Manual (Page 14)

14
I-7011, I-7018 User Manual Rev:B1.0
1.6 Quick Start
Refer to “I-7000 Bus Converter User Manual” and “Get-
ting Start” for more detail.
1.7 Default Setting
Default setting for I-7011/11D/11P/11PD/18/18P :
z Address : 01
z Analog Input Type : Type 05, -2.5 to +2.5 V
z Baudrate : 9600 bps
z Checksum disable, 60Hz rejection, engineer unit format
z I-7018/18P set as INIT* mode, and the analog input is 6 dif-
ferential and 2 single-ended.
1.8 Jumper Setting
I-7018/18P : Jumper JP1 for select the pin INIT*/Vin 7-
Select 8 differential mode, the pin INIT*/Vin7- is set to Vin7-
Select INIT* mode, the pin INIT*/Vin7- is set to INIT*