B&B Electronics Network Device I-7011 - Manual (Page 21)

21
I-7011, I-7018 User Manual Rev:B1.0
General Command Sets (Continued)
~AAO(Data) !AA Set Module Name Sec.2.19
~AAEV !AA Enable/Disable Calibration Sec.2.20
Digital Input/Output, Alarm and Event Counter Command Sets
@AADI !AASOOII
Read Digital I/O and
Alarm Status
Sec.2.21
@AADO(Data) !AA Set Digital Output Sec.2.22
@AAEAT !AA Enable Alarm Sec.2.23
@AAHI(Data) !AA Set High Alarm Sec.2.24
@AALO(Data) !AA Set Low Alarm Sec.2.25
@AADA !AA Disable Alarm Sec.2.26
@AACA !AA Clear Latch Alarm Sec.2.27
@AARH !AA(Data) Read High Alarm Sec.2.28
@AARL !AA(Data) Read Low Alarm Sec.2.29
@AARE !AA(Data) Read Event Counter Sec.2.30
@AACE !AA Clear Event Counter Sec 2 31