12 $aa8, 11 $aa6 2.12 $aa8 – B&B Electronics Network Device I-7011 User Manual
Page 33
Advertising
33
I-7011, I-7018 User Manual
Rev:B1.0
2.12 $AA8
Description : Read LED Configuration
Syntax : $AA8[CHK](cr)
$
delimiter character
AA
address of reading module (00 to FF)
8
command for setting LED configuration
Response :
Valid Command :
!AAV[CHK](cr)
Invalid Command :
?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
!
delimiter for valid command
?
delimiter for invalid command
AA
address of response module(00 to FF)
V
LED configuration
1=module control, 2=host control
Example :
Command : $018
Receive : !011
Read address 01 LED configuration, return module control.
Command : $028
Receive : !012
Read address 02 LED configuration, return host control.
Related Command :
Sec2.13 $AA8V, Sec2.18 $AAZ(Data)
Note : The command is for I-7011D/11PD only
Advertising