B&B Electronics Network Device I-7011 - Manual (Page 32)

32
I-7011, I-7018 User Manual Rev:B1.0
2.11 $AA6
Description : Read Channel Status
Syntax : $AA6[CHK](cr)
$ delimiter character
AA address of reading module (00 to FF)
6 command for reading channel status
Response : Valid Command : !AAVV[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
VV channel enable/disable, 00 is all disabled, and FF is all
enabled.
Example :
Command : $015A5 Receive : !01
Set address 01 enable channel 0,2,5,7 and disable channel
1,3,4,6 , return success.
Command : $016 Receive : !01A5
Read address 01 channel status, return channel 0,2,5,7 enable
and channel 1,3,4,6 disable.
Related Command :
Sec2.10 $AA5VV
Note : The command is for I-7018/18P only