B&B Electronics Network Device I-7011 - Manual (Page 46)

46
I-7011, I-7018 User Manual Rev:B1.0
2.24 @AAHI(Data)
Description : Set High Alarm
Syntax : @AADI[CHK](cr)
@ delimiter character
AA address of setting module (00 to FF)
HI command for setting high alarm value
(Data) high alarm values, data format is in engineer unit format.
Response : Valid Command : !AA[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
Example :
Command : @01HI+2.5000 Receive : !01
Set address 01 high alarm +2.5000, return success.
Related Command :
Sec.2.23 @AAEAT, Sec.2.28 @AARH
Related Topic :
Sec.3.6 High/Low Alarm
Note : The command is for I-7011/11D/11P/11PD only