B&B Electronics Network Device I-7011 - Manual (Page 55)

55
I-7011, I-7018 User Manual Rev:B1.0
2.33 ~AA0
Description : Read Module Status
Syntax : ~AA0[CHK](cr)
~ delimiter character
AA address of reading module (00 to FF)
0 command for reading module status
Response : Valid Command : !AASS[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
SS Module Status. The status will store into EEPROM and
only may reset by the command ~AA1.
*1 : Host watchdog status, 0=Disable, 1=Enable
*2 : Host watchdog timeout flag, 0=Clear, 1=Set
Example :
Command : ~010 Receive : !0104
Read address 02 module status, return 04, host watchdog
timeout flag is set.
Related Command :
Sec.2.34 ~AA1
Related Topic :
Sec.3.2 Module Status, Sec.3.3 Dual Watchdog Operation
7 6 5 4 3 2 1 0
*1 Reserved *2 Reserved