B&B Electronics Network Device I-7011 - Manual (Page 58)

58
I-7011, I-7018 User Manual Rev:B1.0
2.36 ~AA3EVV
Description : Set Host Watchdog Timeout Interval
Syntax : ~AA3EVV[CHK](cr)
~ delimiter character
AA address of setting module (00 to FF)
3 command for set host watchdog timeout interval
E 1=Enable/0=Disable host watchdog
VV timeout value, from 01 to FF, each for 0.1 second
Response : Valid Command : !AA[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
Example :
Command : ~013164 Receive : !01
Set address 01 enable host watchdog and timeout interval is
64 (10.0 seconds), return success.
Command : ~012 Receive : !0164
Read address 01 host watchdog timeout interval, return timeout
interval is 64 (10.0 seconds).
Related Command :
Sec.2.32 ~**, Sec.2.35 ~AA2
Related Topic :
Sec.3.2 Module Status, Sec.3.3 Dual Watchdog Operation