Brocade Communications Systems Brocade MLX Series and Brocade Netlron XMR 53-1002373-02 - Manual (Page 122)

104 Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1002373-02
Mounting Brocade MLXe-4, -8, or -16 routers in a 4-post rack or cabinet
2
8. Install the router in the cabinet or rack. The router slides into the rack on top of the mounting
shelf. Secure the router to the rack rails using eight 10-32 screws. Refer to Figure 69 (MLXe-4
slot router shown).
FIGURE 69 Install the router on the mounting shelf
9. Install the transport brackets to the cabinet or rack rails and to the side plates on the router,
using six 10-32 screws. Refer to Figure 70 .
NOTE
The transport brackets provide extra stability, and must be installed if you plan to ship the device
while it is mounted in the cabinet or rack. Before you install the transport brackets, you must first
remove any installed fans.
FIGURE 70 Attach transport brackets to router and to cabinet or rack