Brocade Communications Systems Brocade MLX Series and Brocade Netlron XMR 53-1002373-02 User Manual
Page 221
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
203
53-1002373-02
Installing a Brocade MLX-32 router
3
FIGURE 141
Slide the device into the rack
4. Use the provided standard #12-24, #10-32 or M6 pan head screws (dependent on the
specifications of your rack) in each available hole on the rack mount bracket to attach the
router to the rack mounting poles. See
.
5. Visually inspect the alignment of the router. If the router is installed properly, the mounting
screws on both sides rack should be aligned with the mounting screws on the opposite side
and the router should be level.
1
Align bottom of router slightly above the seat of the saddle using mechanical lift.
2
Using at least two people, slide router gently onto saddle and into the rack.
2
1