Brocade Communications Systems Brocade MLX Series and Brocade Netlron XMR 53-1002373-02 User Manual
Page 162
144
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1002373-02
Verifying proper operation
2
Active
On
The switch fabric
module is active
and ready to switch
user packets.
Off for an
extended
period.
The switch fabric module is not active and user packets are not
being switched from one interface module to another.
You must replace the switch fabric module. Refer to
AC power supplies
AC
Green (steady)
The power supply is
receiving power
from the AC power
source.
Off
The power supply is not receiving power from an AC power source
You can do the following:
•
Make sure that the power cord is connected securely to the
wall outlet and the power supply.
•
Make sure that the wall outlet is rated for 115/120V and
20A. If it is not, obtain a cable that is rated for the outlet.
•
Make sure that the wall outlet has power.
AC OK
Green (steady)
The power supply is
providing AC power
to the router.
Off
The power supply is not supplying power to the router. If the AC
LED is green, there is a problem with the power supply and it
must be replaced.
ALM
Off
The power supply is
in normal operating
condition.
Amber
The power supply is malfunctioning.
DC power supplies
DC IN
Green (steady)
The power supply is
receiving power
from the DC power
source.
Off
The power supply is not receiving power from a DC power source
You can do the following:
•
Make sure that the power supply cables are connected
securely to the power source and the power supply.
•
Make sure the wall outlet is rated for high line, 200-240 VAC
and 20A. If it is not obtain a cable that is rated for the outlet.
•
Make sure that the power source has power.
DC OUT
Green (steady)
The power supply is
providing DC power
to the router.
Off
The power supply is not supplying power to the router. If the DC IN
LED is green, then there is a problem with the power supply and
it must be replaced.
ALM
Off
The power supply is
in normal operating
condition.
Amber
The power supply is malfunctioning.
TABLE 33
Router LED states and actions (Continued)
LED label
Desired state
Meaning
Abnormal
state
Meaning or action