Dual speed oc-12c and oc-48c pos interface modules, Figure 26, Figure 27 – Brocade Communications Systems Brocade MLX Series and Brocade Netlron XMR 53-1002373-02 User Manual
Page 63: Router modules, Port oc-12x and oc-48c pos interface module, Port oc-12c and oc-48c pos interface module
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
45
53-1002373-02
Router modules
1
NOTE
All POS modules support both Packet over SONET and Packet over SDH.
Dual speed OC-12c and OC-48c POS interface modules
Dual-speed OC-48c or OC-12c POS interface modules can be reconfigured through the CLI to
support OC-48 or OC-12 speeds.
The front panels of OC-12c and OC-48c POS interface modules contain the following features:
•
Two, four, or eight ports that can accommodate SFP optics.
•
A power LED to indicate if power is being received by the module.
•
Four LEDs per port that indicate the following port states: Active or Local Fail, TX Pkt, RX Pkt,
and Carrier Rcvd or Remote Fail.
•
Two IN and two OUT RJ-48 connectors to provide a BITS external clock source and to propagate
a common clock source (Line or BITS) among POS modules.
illustrate these features.
FIGURE 26
2-port OC-12X and OC-48c POS interface module
FIGURE 27
4-port OC-12c and OC-48c POS interface module
1
Power
3
Port 2
5
BITS clocking port
2
Port 1
4
Port status LEDs
1
Power
3
Port 2
5
Port 4
7
BITS clocking ports
2
Port 1
4
Port 3
6
Port status LEDs
Power
Active /
Local Fail
Tx Pk
t
BITS1
BITS2
Rx Pkt
Carrier Rcvd /
Remote Fail
I
N
O
U
T
1
2
1
2
I
N
O
U
T
1
2
4
5
3
Power
Active /
Local Fail
Tx Pk
t
BITS1
BITS2
Rx Pkt
Carrier Rcvd /
Remote Fail
I
N
O
U
T
1
2
3
4
1
2
3
4
I
N
O
U
T
2
4
1
6
7
3
5