IKA ULTRA-TURRAX Tube Drive control - Manual (Page 23)

23
UTTD_c_022014
 Press the “Rotating/Pressing” knob (B) again to complete the
setting.
 Press the “Menu/Back” button (C) to return to the working
screen.
Maximum rotation speed (max rpm) 11.3
The default setting “max rpm” is 6000 rpm in the device. User
can change the setting to the range of 400 to 6000 rpm in the
main menu.
The “max rpm” setting will be stored automatically when opera-
tion is over or the device is switched off.
• Setting “max rpm”

Press the “Menu/Back” button (C) in the main menu.
 Turn the “Rotating/Pressing” knob (B) to select the “max rpm
item in the main menu.
 Press the “Rotating/Pressing” knob (B).
 A mark  will appear to indicate the activated item.
 Turn the “Rotating/Pressing” knob (B) to adjust the value.
 Press the “Rotating/Pressing” knob (B) again to complete the
process.
 Press the “Menu/Back” button (C) to return to the working
screen.
Note: The speed „max rpm” can be adjusted with the “Rotating/
Pressing” knob (B) in a range between 400 to 6000 rpm. This is
achieved in magnitudes of 10 rpm. In remote control mode via
computer, adjusting magnitude is 1 rpm.
Timer maximum value (timer max) 11.4
The default “timer max” is 30 minutes in the device. User can
change the setting in 10 second intervals and up to 30 minutes
in the main menu.
The “timer max” setting will be stored automatically when opera-
tion is over or the device is switched off.
• Set “timer max”

Press the “Menu/Back” button (C) in the main menu.
 Turn the “Rotating/Pressing” knob (B) to select the “timer max”
in the main menu.
 Press the “Rotating/Pressing” knob (B)
 A mark  will appear to indicate the activated item.
 Turn the “Rotating/Pressing” knob (B) to change the value.
 Press the “Rotating/Pressing” knob (B) again to complete the
process
 Press the “Menu/Back” button (C) to return to the working screen.
Note: The timer „timer max” can be adjusted with the “Rotating/
Pressing” knob (B) in a range from 10 seconds to 30 minutes. This is
achieved in magnitudes of 10 seconds. In remote control mode via
computer, adjusting magnitude is 1 second.