JLG X17J Plus Operator Manual User Manual
Page 104
B)
Moving the undercarriage with the machine not aligned:
‑
Open the electrical components compartment.
‑
Place the emergency key on the electrical components
compartment, removing it from the machine’s key holder,
where it is sealed with lead (see photo).
‑
Turn the emergency key clockwise and hold it in position
(see sticker).
The display on the remote control shows the
safety device BYPASS icon.
‑
Use the travel control with extreme care to avoid causing damage to the machine or
people.
Move to a suitable position for carrying out procedure A, used to realign the machine.
‑
At the end of the operation release the key, remove it, put it back in its original position
and close the electrical components compartment.
‑
The electronic control board records every time the safety device bypass key is used.
BOOM LIFT MODELS X17JPLUS
JLG
100
X17JPR0020413
O
PERATION ALLOWED ONLY TO REACH THE CONDITIONS NECESSARY TO PERFORM THE PROCEDURE
DESCRIBED UNDER POINT A
). A
NY OTHER USE IS PROHIBITED
.