JLG X17J Plus Operator Manual - Manual (Page 51)

When the load sensor measures a load exceeding the allowed work load ‑ 230 kg ‑ the main
screen disappears for three seconds, replaced by the overload error display, the audible war‑
ning is activated, then the overload icon appears in position 5 in place of the icon enabling
the overhead movements.
OVERLOAD ERROR DISPLAY
POSITION 6:
Position 6 displays the icon confirming that track movements (stabilisers, tracks, track exten‑
sion) are enabled.
This icon means that all conditions for operating the track movements have been checked.
No icon on means the stabilisers cannot be used and the track cannot be extended. The
machine, however, can travel even when the icon is off, as long as all 4 stabilisers are lifted
from the ground.
X17JPR0020413
BOOM LIFT MODELS X17JPLUS
JLG
47