JLG X17J Plus Operator Manual User Manual
Page 83
Advertising
79
After the conditions described above have been checked, make sure there are no obstacles in
the working area of the jib arm, and proceed as follows:
‑
Use joystick 6 to move the jib arm. If another joystick is used, an error message will be
shown on the display:
‑
AFTER PASSING THE INCLINE THAT REQUIRED THE JIB ARM TO BE OPENED,
RETURN THE MACHINE TO THE CLOSED CONFIGURATION TO CONTINUE
TRAVELLING.
‑
With the jib arm raised always travel at minimum speed and keep the jib arm as close to
the ground as possible.
‑
DO NOT travel downhill if the jib arm is not completely folded.
BOOM LIFT MODELS X17JPLUS
JLG
X17JPR0020413
Advertising