JLG X17J Plus Operator Manual - Manual (Page 42)

3.1 BATTERY CUTOUT SWITCH
This device, located on the left side of the electrical components compartment, is used to iso‑
late the machine’s electrical circuit, stopping any movements. It is well‑visible and easily
accessed without using tools. It only needs to be activated for prolonged machine downtime
or maintenance operations.
Turning the key clockwise closes the machine’s electrical circuit, while turning it anticlockwi‑
se isolates the machine’s electrical circuit and the key can be removed.
B EFORE DISCONNECTING THE BATTERY BY MEANS OF THIS DEVICE , MAKE SURE THAT THE ENGINE
KEY IS IN POSITION
“
OFF
”
AND THE REMOTE CONTROL AND ELECTRONIC BOARD ARE OFF
.
3.2 DISTRIBUTOR PRESSURE RELIEF VALVES
All platform distributors have a pressure relief valve that limits the pressure inside the
system to the value set for the same valve.
These valves are set when the platform is tested by qualified personnel and must not be tam‑
pered with for any reason whatsoever.
IMPORTANTE
X17JPR0020413 38
BOOM LIFT MODELS X17JPLUS
JLG
WARNING
THERMIC MOTOR LITHIUM MOTOR