JLG X17J Plus Operator Manual - Manual (Page 149)

145
8 SAFETY STANDARDS FOR TRANSPORT
Always make sure that the vehicle used to transport the platform has suitable capacity and
that no part of the MEWP protrudes from the size limits prescribed by the road traffic regu‑
lations.
D
URING TRANSPORT , COVER THE REMOTE CONTROL WITH THE SPECIAL PROTECTION CASING PROVI ‑
DED , OR DISCONNECT IT AND STORE IT IN A SAFE PLACE .
8.1 REMOVING THE BASKET
The basket can only be removed to allow transit through openings measuring between 1500
and 990 mm.
I F THE MACHINE IS WITHOUT BASKET , ONLY THE TRACKS CAN BE MOVED , KEEPING AT A MINIMUM
DISTANCE OF
1
METRE FROM THE MACHINE
.
To remove the basket, proceed as follows:
‑ remove the remote control from the support;
‑ loosen the aluminium covers on the basket fixing pins (see photo);
‑ withdraw the basket from above.
Reassemble the basket as follows:
‑ fit the basket into the fixing pins on the basket support, making sure that it moves
downwards as parallel to the basket support as possible.
‑ Tighten the two aluminium covers.
BOOM LIFT MODELS X17JPLUS
JLG
X17JPR0020413
IMPORTANTE WARNING