JLG X17J Plus Operator Manual User Manual

Page 116

Advertising
background image

Fluid that leaks under pressure may penetrate the skin. Always discharge pressure befo‑
re removing the hydraulic hoses and tighten connections correctly before pressurising.
Keep hands and body away from small holes and nozzles where high‑pressure liquids
may be released. Use cardboard or paper to identify leaks.

Heavy parts must be lifted using a lifting device with suitable capacity.

It is prohibited to carry out any maintenance operations with the working arm not com‑
pletely lowered and/or with stabilised machine.

If operations are being carried out, apply a visible sign on the start panel, stating “DAN‑
GER. Do not move the machine, service in progress
”.

7.6 OPERATING THE MACHINE FROM THE SECOND CONTROL POSITION ON THE
GROUND USING THE OPTIONAL SECOND REMOTE CONTROL DURING MAINTE‑
NANCE

This type of operation is only allowed in the event of maintenance on the machine by expert
personnel.

For the controls from the ground position with the optional second remote control, see the
corresponding paragraph.

Stop the machine, key in the OFF position.

Withdraw the opening key of the distributor’s controls protection from the lead‑covered
keys group in the electrical components box;

‑ Insert the key and open the distributor’s controls protection. Select the ground remote

control operating on the relevant selector.

Connect the optional second remote control following the procedure specified in the cor‑
responding paragraph (make sure the contacts of the connectors on the remote control
and the machine are completely dry).

Start the machine, key in the ON position.

Check that the icons are correctly shown on the display on the remote control in the
ground position.

Move the aerial part of the machine using the remote control from the ground, following
the instructions given in the paragraphs regarding the operation of the machine. If the
load in the basket exceeds 50 kg, to use the remote control from the ground hold button
8 and then activate the required movement.

BOOM LIFT MODELS X17JPLUS

JLG

112

X17JPR0020413

Advertising