JLG X17J Plus Operator Manual - Manual (Page 65)

61
‑ AERIAL PART HYDRAULIC DISTRIBUTOR
The hydraulic distributor is fitted with levers and buttons for the selection of the required
movement, its direction and speed. The structure is moved by using the levers after holding
the key in position.
The meanings of the levers on the distributor are described below:
BOOM LIFT MODELS X17JPLUS
JLG
X17JPR0020413
1 2 3 4 5 6 7
Ref. Description Lever/Movement obtained Pictogram near the control
6
First‑second arm
control
Moving lever 6 upwards:
1st‑2nd arm up
Moving lever 6 downwards:
1st‑2nd arm down
5
Third‑fourth
arm control
Moving lever 5 upwards:
3rd arm up
Moving lever 5 downwards:
3rd arm down
4 Extension arm control
Moving lever 4 upwards:
extension arm out
Moving lever 4 downwards:
extension arm in
3 Jib control
Moving lever 3 upwards:
jib opens
Moving lever 3 downwards:
jib folds