JLG X17J Plus Operator Manual User Manual
Page 64
CONNECTING THE REMOTE CONTROL TO USE IT FROM THE GROUND
The remote control in the basket (or an optional second remote control) can be used for
maintenance operations by connecting it to the special socket on the machine.
To do this, proceed as follows:
‑
If not already in your possession procure the appropriate service kit from ground in an
authorized JLG centre.
‑
With the machine off (key on OFF position) connect the service cable for ground remote
control to the proper service connector located near the electrical components box under
the protective cover, then connect the remote control to the service cable
‑
Select ground control operating the selector on the controls box.
‑
If using the remote control provided in the basket as control device from ground, con‑
nect the free cable in the basket to the specially provided optional connector supplied in
the ground service use kit.
‑
Turn the key to position ON and start the machine.
The remote control can be used from the ground to perform all possible operations within safety
limits if the load in the basket is less than 50 kg. If the load in the basket exceeds 50 kg (always
within the machine’s load limits), in order to be able to use the remote control from the ground
hold button 8 and activate the desired control.
IT IS STRICTLY FORBIDDEN TO USE THE REMOTE CONTROL FROM THE GROUND TO
MOVE THE MACHINE WHEN AN OPERATOR IS IN THE BASKET.
BOOM LIFT MODELS X17JPLUS
JLG
60
X17JPR0020413
PERICOLO
DANGER