Install new link, Install new link -37 – JLG 600SC_660SJC Service Manual User Manual
Page 139
Advertising
SECTION 4 - BOOM & PLATFORM
3121607
– JLG Lift –
4-37
Install New Link
1.
Squeeze cut-out end of new link into half-shear (female)
end of track section.
2.
Spread half-shear (female) end of new link and slide cut-
out end of track section into it. Use screwdriver if neces-
sary.
3.
Round half-shears will not fit properly in cut-outs after
new link is installed .
Advertising