JLG 600SC_660SJC Service Manual - Manual (Page 20)

SECTION 1 - SPECIFICATIONS
1-6 – JLG Lift – 3121607
2. Swing Drive Hub
Lube Point(s) - Level/Fill Plug
Capacity - 17 oz. (1/2 Full)
Lube - EPGL
Interval - Check level every 3 months or 150 hrs of oper-
ation; change every 2 years or 1200 hours of operation.
3. Final Drive Hub
Lube Point(s) - Level/Fill Plug
Capacity - 2.1 gal.(7.9 L); 1/2 Full
Lube - EPGL
Interval - Check level every 3 months or 150 hrs of oper-
ation; change every 2 years or 1200 hours of operation.
4. Hydraulic Return Filter
Interval - Change after first 50 hrs. and every 6 months
or 300 hrs. thereafter or as shown by Condition Indica-
tor.
5. Hydraulic Charge Filter
Interval - Change after first 50 hrs. and every 6 months
or 300 hrs. thereafter, or as shown by Condition Indi-
cator.
6. Hydraulic TankLube Point(s) - Fill Cap
Capacity - 26 gal. Tank; 40 gal. System
Lube - HO
Interval - Check Level daily; Change every 2 years or
1200 hours of operation
NORMAL OPERATING
RANGE WITH BOOM
IN STOWED POSITION