JLG 600SC_660SJC Service Manual User Manual
Page 141
Advertising
SECTION 4 - BOOM & PLATFORM
3121607
– JLG Lift –
4-39
NOTE: Make sure snap rings are seated in pin groove and closed
properly.
1.
Install new 8-32 x 0.500 self-threading Torx head screw
in end of new aluminum round bar. Torque to 18-20 in-
lb (2-2.25 Nm).
2.
Pull up on other end of round bar. Slide new poly roller
on bar.
Correct
Incorrect
Advertising