2N Wireless 3G router 2N EasyRoute_new design - User manual, 1670 v1.06 - Manual (Page 16)

Mounting 2.3
16
2.3 Mounting
External Antenna Connection
Screw the antenna included in the package into the SMA antenna connector.
Caution
 Tighten the antenna connector gently by hand – never use wrenches!
Note
 The antenna has a sufficient gain for a trouble-free operation in normal
conditions. If the GSM signal is poor or you want to place your antenna
separately from 2N
® EasyRoute, you can use an antenna with an SMA-
connector terminated cable (not included). The antenna should be
mounted vertically.
 The antenna should be located within the same building as 2N ® EasyRoute.
SIM Card Installation
Release the safety pin and open the SIM cardholder on the 2N ® EasyRoute backside.
Insert the SIM card and click the holder back into position.
Cautions
 Make sure that your GSM provider’s SIM card is compatible with the GSM
network supported by your 2N
® EasyRoute version.
 Select the required GSM provider and SIM card services, such as call
forwarding, call barring, preferred networks, SMS centre, etc. in your
mobile phone before inserting your SIM card in 2N
® EasyRoute.
Figure 2.3
SIM Card
Installation