Telephone line connection, Pbx connection, 4 telephone line connection – 2N Wireless 3G router 2N EasyRoute_new design - User manual, 1670 v1.06 User Manual
Page 18: Telephone line connection 2.4
Telephone Line Connection
2.4
18
2.4 Telephone Line Connection
PBX Connection
Connect 2N
®
EasyRoute to a vacant CO line of your PBX. Configure your PBX in such a
manner that UMTS and GSM (VoIP for EFR) outgoing calls are routed to
2N
®
EasyRoute.
Tip
2N
®
EasyRoute - ER is equipped with the FSK-based CLIP function. If your
PBX is able to process the caller’s ID, you are advised to enable this
function.
2N
®
EasyRoute - ERF is equipped with an FSK/DTMF-based Calling Line
Identification (CLIP) function.
Telephone Set (Answering Machine,
Coin Telephone Station, Fax) Connection
You can connect a standard telephone, an answering machine or any other FXO-
interface terminal to 2N
®
EasyRoute.
In addition to the above mentioned devices, you can connect an analogue FXO-
equipped fax machine to your 2N
®
EasyRoute - ERF.
Tip
2N
®
EasyRoute - ER is equipped with the FSK-based CLIP function. If your
PBX is able to process the caller’s ID, you are advised to enable this
function.
2N
®
EasyRoute - ERF is equipped with an FSK/DTMF-based Calling Line
Identification (CLIP) function.