2N Wireless 3G router 2N EasyRoute_new design - User manual, 1670 v1.06 - Manual (Page 34)

Table of Programmable Parameters 3.2
34
Signal
Displays the current strength of the receiving signal in [dBm].
Operator
Displays the name of the provider to which the SIM is logged in. If the SIM card
cannot log in to a network (e.g. requires the PIN), the Limited service message
is displayed.
Connection type
Displays the type of 2N ® EasyRoute connection to a wireless network (GSM,
EDGE, GPRS, UMTS, HSDPA/HSUPA, etc.).
Internet