2N Wireless 3G router 2N EasyRoute_new design - User manual, 1670 v1.06 - Manual (Page 76)

Table of Programmable Parameters 3.2
76
Passive
Tick off to define that this party will not initiate connection.
Phase 1
Set phase 1 keying for negotiating details on IP connection, gateway, and similar.
Phase 2
Set encryption for data transmission.
Remote LAN address
Set the IP address of a remote network or an IP address from the range of the
remote network.
Remote LAN mask
Remote network mask.
Remote public gateway
Public IP address of the opposite gateway.
IPsec - Manual
Caution
Setting the IPsec function in this menu is rather difficult. Refer to the
dedicated IPsec HOW TO manual at www.2n.cz or on the enclosed CD for
more details.
IPsec – PSK
In this menu set the pre-shared security keys. The keys are included in the table
below according to the identifier settings in the VPN menu.
Identifier
The same as in the VPN menu. A matching key is then assigned to the identifier.
Enter any ASCII characters to form a word, IP address, e-mail address, or a
sequence of random characters.
Pre-shared key
Use this parameter to define the security key for packet encryption between the
IPsec tunnel parties.