2N Wireless 3G router 2N EasyRoute_new design - User manual, 1670 v1.06 - Manual (Page 39)

Table of Programmable Parameters 3.2
39
Phone number to SMS notification
Set up to 5 nine-digit numbers (e.g. 765123456) to which notification SMS on the
2N
® EasyRoute state should be sent. All generated SMS will be sent to all the
numbers entered here.
Balance
Enable
Enable USSD commands to be sent.
Request
Set your provider code to get your credit info. Check the provider settings for the
provider code.
Period
Set the time intervals between individual USSD commands.
Message filter
Specify the location of the credit info in the incoming SMS text. If no filter is used,
the date may be displayed instead of credit info. The program finds the first
occurrence of the required number in the message.
Balance value
This item displays the current credit amount on the prepaid SIM card.
Last message time
This item displays the date and time of the last-received SMS.
Last message
This item displays the entire last-received SMS (without filter).
Instant request
Used for credit recharging, for example. Enter the command to be sent and click
on Apply. The answer is displayed in the Last SMS parameter until the next
immediate request is sent or the request is sent after the Period timeout elapses.