2N Wireless 3G router 2N EasyRoute_new design - User manual, 1670 v1.06 - Manual (Page 37)

Table of Programmable Parameters 3.2
37
data transmitted in the given direction. The third parameter sets the amount of
data to be transmitted. The fourth parameter defines units.
Time
Enable that the preset time limit should be applied to Internet connection. The
second parameter is for information only and displays the current time of
connection use. The third parameter sets the allowed connection time. The fourth
parameter defines units.
Erase period
Define how often the FUP counter should be reset. Options: Now – immediate
reset, Daily, Weekly, or Monthly.
Last erase
Displays the system time at which the counter was reset for the last time. From
this time on, the next resetting period as set in the Reset period parameter is in
progress.
Next erase
Displays the system time at which the counter will be reset for the next time. This
time depends on the Reset period and Last reset parameters.
Note
 If you set multiple FUP limit parameters, e.g. Download and Time, the
more exhausted limit is displayed in the STATUS menu. For example, if
the Download use is 38% and the Time use is 87%, then the STATUS
page will show 87%.
Voices
Noise suppression
Use this parameter to enable/disable noise suppression.
Echo cancellation mode
Use this parameter to enable one of the predefined echo cancellation modes.
Setting options: OFF
Handset (ESEC)