2N Wireless 3G router 2N EasyRoute_new design - User manual, 1670 v1.06 - Manual (Page 78)

Table of Programmable Parameters 3.2
78
Firmware 0/1
Information on the firmware version, date of issue and downloading instance
number (behind the ‘#’ symbol). An Active note is added to one of the firmware
instances to indicate the currently used one. The new firmware is stored
automatically, replacing the preceding one, and becomes active after restart.
Thus, whenever restarted, the gateway operates with the firmware version with
the highest serial number.
Choose…
Push this button to choose the path to firmware for upgrading.
Automatic reboot
Enable/disable the automatic gateway restart after firmware downloading.
Tip
 Use the Update button with the Automatic restart option to restart the
gateway remotely.
Time
Remember to set the SNTP server to make the system time work properly. If the
SNTP server is unavailable, system time is obtained from the GSM/UMTS
provider’s module.
Time zone
Set the time zone according to the UTC standard and/or a shift with respect to
GMT 0.
Daylight saving
Set whether the daylight saving (summer) time should be respected in the system
time and specify the count of hours for the shift.
Used – displayed in the daylight saving time mode.
Setting options: OFF
+1 hour
+2 hours
Daylight start
Set a month, week and day in the week for daylight saving time activation to
optimise its use.
Default setting: March, Last week, Sunday