2N VoiceBlue Lite - Manual v2.6 - Manual (Page 101)

2N - VoiceBlue Lite
Network list
Fig. 49 – GSM Calling Group Defining Window
The Network list helps the gateway connect calls to various GSM
networks. You can define call routing by prefixes in eight groups.
You will find the following items in the editing window:
• Table of replaced prefixes – a table of prefixes to be replaced
(e.g. '+420' with '0'). This change is made before the prefix
table is checked.
• Table of prefixes – a table of called prefixes. You can define
the dialling length too here. If you do not enter the dialling
length, the Default count of dialling digits will be used
automatically.
• GSM network ID – a numerical identification code of the
selected prefix table used for internal identification purposes
only. It has no influence on call routing.
• Default count of digits – used for defining the count of digits to
be considered if the count is not included in the prefix table.
LCR table
The LCR (Least Cost Routing) table helps define the call routing
procedure according to the called subscriber's number depending
on the day time and day in a week (refer to Subs. 7.3).
91