2N VoiceBlue Lite - Manual v2.6 - Manual (Page 26)

Fig. 10 – Supply Adapter Connection
2.7. SIM Card Installation/Removal
Insert the SIM card into the SIM card slots with your hand as
shown in Fig. 11. Please make sure that the slashed SIM card side
is on a side opposite to the latch. Having inserted the SIM card,
push the card gently until you hear a click signalling that the
push/pull holders have snapped the card. Secure the SIM card by
shifting the latch to the right in order to avoid incidental removal
of the SIM card.
To remove the SIM card take the opposite steps. You can replace a
SIM card even with the gateway on.
16