2N VoiceBlue Lite - Manual v2.6 - Manual (Page 93)

2N - VoiceBlue Lite
• Call delay – the time period between the end of the last call
and beginning of the next call via one and the same GSM
module (all incoming and outgoing calls are rejected during
this time). The recommended value is about 2 s - do not change
this setting please unless absolutely necessary.
• Min. numbers from VoIP – the minimum count of digits dialled
into the GSM network.
• Max. numbers from VoIP – the maximum expected count of
digits dialled into the GSM network.
• Wait for next digit – time during which VoiceBlue Lite waits
for another digit dialled from the VoIP network to GSM.
• SIM number – the SIM Id number to be displayed in the
diagnostic window and records on calls.
• IMSI – International Mobile Subscriber Identity
• SCID – SIM Card Identification number
• Dial tone - selection of dial tones which will be played to the
caller from the GSM network
• Ring tone - selection of control ring tones which are to be
played to the caller from the GSM network.
• Error GSM causes – allows changing of GSM release causes
for call control. Individual causes are transferred to SIP
message number according the chart in “Cause transfer -> Add
-> ?” item.
• Causes transfer – for GSM call control causes change
83