2N VoiceBlue Lite - Manual v2.6 - Manual (Page 69)

2N - VoiceBlue Lite
• Remove all - used for removing all gateways from the list of
used gateways.
• Select – click on this button to select a GSM gateway whose
parameters can be set after Close is pressed.
• Connect – by clicking on this button the VoiceBlue Lite
programs attempts to connect to the gateway according to the
setting in “Settings -> Communication settings..”
configuration. If the communication type was not selected, the
program starts to scan COM ports in order to find connected
gateway.
• Close – used for closing the Gateway selection window and
opening the gateway configuration window.
59