2N VoiceBlue Lite - Manual v2.6 - Manual (Page 98)

GSM incoming groups
Fig. 48 – Incoming Group Setting Window
The 2N - VoiceBlue Lite gateway allows you to work with four
groups of incoming calls. You can select different settings for each
of them with respect to establishing incoming calls. To set the
default parameters use the Default button. The meanings of the
card items are as follows:
• Mode – set the way the GSM gateway shall process incoming
calls from the GSM network:
• Reject incoming calls – all incoming calls from the GSM
network are rejected automatically.
• Ignore incoming calls – all incoming calls from the GSM
network are ignored automatically. The calling subscriber
hears the ringing tone.
• Receive incoming calls + voice message – incoming calls
from the GSM network are received and, if defined so,
the voice message is enabled for the incoming call while
awaiting digits in DTMF.
88