Service at commands, Special gsm commands, Network params – 2N VoiceBlue Lite - Manual v2.6 User Manual

Page 126: Routing params, Totals

Advertising
background image

%P07=uuu/HH:MM,

pseudo tarif extension

%P09=mode,sec

pseudo mode (0=off,1=cdr,2=cdr+lan), count of secbetween
AOC (1..250)

Network params:

%N#0=opx/npx,

list of old/new main-prefixes (max 47 chars)

%N#1=pref/dig, list

of

prefixes/digits-to-end (max 63 chars)

%N#2=pref/dig,

pref. list extension (max 63 chars)

%N#3=pref/dig,

pref. list extension (max 63 chars)

%N#4=pref/dig,

pref. list extension (max 63 chars)

%N#5=pref/dig,

pref. list extension (max 63 chars)

%N#6=pref/dig,

pref. list extension (max 63 chars)

%N#7=pref/dig,

pref. list extension (max 63 chars)

%N#9=netid,max

network id (7 chars), default max digits (0..20)

Routing params:

%A##=clip,dial

Autodial (autocallback restricted) clip=clip from GSM, dial=dial
to VoIP

%A##=clip,dial,limit Autodial

or

autocallback clip=clip from GSM, dial=dial

to VoIP,limit=max length of call

%A##=clip,,limit

Autocallback (autodial restricted) clip=clip from GSM,
,limit=max length of call

%R##=net,hh:mm/hh:mm/w+-,groups,lim set lcr-routing item (ix 0..63)

net (1..8), groups (max 7 chars=1..9)

call limit (0=off, 1..99min)



DISA record commands

!m=erase

erase of DISA message

!m=record

record of DISA message from modul g0

routine for DISA record

establish call to GSM: at!sg0={GSM phone number}
after connect type: at!m=record

recording of the message (65 sec or press <ENTER> to finish)

hang ap on VB site: at!d

Totals

; first m,c,s

inc. minutes,calls,smses

; second m,c,s

out. minutes,calls,smses

116

Advertising
This manual is related to the following products: