2N VoiceBlue Lite - Manual v2.6 - Manual (Page 85)

2N - VoiceBlue Lite
Voice message
Used for reading and writing of voice messages to the VoiceBlue
Lite gateway. This window is separated in to sections. The “Read /
Write message using COM” is intended for upload and download
of voice messages via the protocol X-modem
Fig. 40 – Voice Message Recording Guide
• Write voice message – performed after pressing button
Read/Write recording of message to VoiceBlue
• Read voice message – performed after pressing button
Read/Write download of message to VoiceBlue
• File for reading/writing message – selection of name of file
which is to be loaded into VoiceBlue.
Voice message parameters
Sampling frequency: 8 kHz
Number of bits in sample 8
Audio encoding method: CCITT A-law
Channels: Mono
Length of recording:
Max. 4s
• Voice message type:– selection of type of message which is
to be loaded into VoiceBlue. Before loading the voice
message, please check whether the message parameters
correspond to the requirements placed on this message.
75