2N VoiceBlue Lite - Manual v2.6 - Manual (Page 95)

2N - VoiceBlue Lite
of them with respect to establishing connections, count of called
minutes and sent messages within a period. To set the company
parameters use Default. The meanings of the card items are as
follows:
• Roaming enabled for network – an international identification
code of the network for which roaming is enabled. It consists
of two numbers:
• MCC – Mobile Country Code (Czech Republic -
230)
• MNC – Mobile Network Code (T-Mobile 01,
Eurotel 02, Oskar 03)
Thus, the T-Mobile International Identification
Code in Czech Republic is 23001.
To disable roaming leave this field blank.
• CLIR – This parameter defines whether or not the calling SIM
card telephone number shall be displayed to the called party. It
is not recommended to present the telephone number of the
SIM card inserted in the GSM module to the called party to
avoid calling back problems. It is impossible for technical
reasons to transmit telephone numbers of SIP terminals to a
GSM network. One of the following parameters can be set for
each GSM group:
• Factory – default settings of the GSM provider.
• Disable (CLIP on) – the SIM card telephone
number is transmitted to the GSM network.
Contact your GSM provider for activation of this
service if it is not supported automatically.
• Enable (CLIP off) – the SIM card telephone
number is not transmitted to the GSM network.
CAUTION! Some GSM providers do not support
this function, which might lead to rejection of an
outgoing call.
• Max. number of called minutes – defines the maximum number
of minutes called within a moth through the given SIM card.
This parameter is ignored if 0 is selected.
85