2N VoiceBlue Lite - Manual v2.6 - Manual (Page 88)

System parameters
Fig. 43 – System Parameters Window
This configuration window has three subgroups. The following
parameters to be configured are explained according to these
subgroups.
• IP setting
• IP address – set the IP address to be assigned to
VoiceBlue Lite;
• Subnet mask – set the subnetwork mask;
• IP router – set the IP address of the gateway that
VoiceBlue Lite uses for connection with another network.
• Modes
• CDR mode – the CDR (Call Detail Report) helps record
data on calls. Select on which calls and whether data
should be recorded in a pull-down menu.
• Unit ID – used for VoiceBlue Lite identification in case
in case there are more devices in the network that
generate the CDR.
78