2N VoiceBlue Lite - Manual v2.6 - Manual (Page 97)

2N - VoiceBlue Lite
• Default delay for “SMS at no answer” – the service SMS at no
answer makes it possible to send information text messages to
a user to the GSM network who at the time of a call from the
VoIP network was not available. The wording of the text
message can be edited in the field Text SMS (number = %N).
In this field it is possible to designate how long the called
party’s telephone should ring before the text message is sent. If
the value “0” is set here, this function is not switched on.
• Text of the “SMS at no answer” - in this field it is possible to
edit the text which will be sent via a text message if the
subscriber in the GSM network is unavailable.
• CLIP to GSM separator – if not empty, the character separates
Called party number and calling party number in the setup
message to GSM
Example:
“CLIP to GSM separator” = “#”. If the user 999 in VoIP
network dials +420123123123 to GSM, the VoiceBlue Lite
dials +420123123123#999 to GSM network.
87