2N VoiceBlue Lite - Manual v2.6 - Manual (Page 77)

2N - VoiceBlue Lite
9.1. Establishing Communication with VoiceBlue Lite
The communication establishing procedure is summed up in the
two steps mentioned below, Gateway selection and
Communication setting.
Gateway selection
Select “Gateway -> Gateway list (ALT + F4)” in the Main menu
of the configuration program. From the list of gateways select
gateway to be configured (refer to Subs. 8.2).
Communication setting
In the Main panel select “Settings -> Communication setting“ and
the type of gateway connection.
Use the Communication setting window to select the type of
configuration program communication with 2N - VoiceBlue Lite.
This selection opens a configuration window (see Fig. 32).
You can use a serial cable, USB cable, the LAN or Internet for
communication with VoiceBlue Lite.
Fig. 32 – Communication Setting Window
67