2N VoiceBlue Lite - Manual v2.6 - Manual (Page 117)

2N - VoiceBlue Lite
Fig. 65 - Voice Callback centre settings
In case that the XAPI server is correctly configured and access
parameters are properly set, the Voice Callback centre software
will automatically establish connection with XAPI server.
It is possible to check that also in the LOG of Voice Callback
Centre where you may see parameters of connection and type of
license.
Fig. 66 - Communication LOG
Each GSM user that is allowed to use Voice Callback service must
be added to “users table” and must have filled up following
parameters: Name, CLIP (identification of user phone) and right
tariffs (credits) for each group (destination).
In case, that you are adding more new users you can use tariffs
templates, which you will assign for each new user.
On Fig. 67 is shown, that Pavel has phone number
+420605123456 and credit rights for destination Group 1 only
107