2N VoiceBlue Lite - Manual v2.6 - Manual (Page 40)

The VoiceBlue Lite configuration with one SIP VoIP telephone is
often used for testing purposes before implementation to the VoIP
network. For this connection see Fig. 15.
Fig. 15 – Point-to-Point Configuration with SIP VoIP Telephone
In the Point-to-Point mode using a VoIP gateway, all calls
assigned to GSM are routed to VoiceBlue Lite by the VoIP
gateway. You can either set the IP address of the opposite side as
the Proxy server IP address for the two terminals, or, with an
intelligent VoIP gateway, resend certain calls to the VoiceBlue
Lite IP address directly.
Fig. 16 – Point-to-Point Configuration with VoIP Gateway
30