Incoming calls from gsm to voip network – 2N VoiceBlue Lite - Manual v2.6 User Manual

Page 59

Advertising
background image

2N - VoiceBlue Lite

• If the selected GSM module is busy or has an insufficient

credit, the preceding step is repeated for the following line of
the Groups section. If there is no record, the next LCR table
line is searched.

• In case the selected GSM module is free and has a sufficiently

high credit, the GSM gateway starts dialling the GSM number.

• If the calling subscriber number has an unknown prefix, or all

routes are busy, the GSM gateway rejects the call request.

• An outgoing call is not billed until the called party answers the

call.

• The GSM network signals the off-hook and the GSM gateway

transfers this information to the SIP Proxy.

*

• You can enable transmission of a connecting tone for

outgoing GSM calls, which replaces the silent moment
between the request sending and ringing tone.

Fig. 23 – Routing of Outgoing GSM Calls

*

This posibility is for TC35i modules only

49

Advertising
This manual is related to the following products: