2N VoiceBlue Lite - Manual v2.6 - Manual (Page 86)

The section “Writing DISA using GSM” is intended for recording
DISA message using the GSM phone.
• GSM number to be dialled – ether the phone number of
your GSM phone
• Erase message before recording – Ensures erasing of the
voice message before dialling to GSM network
• Dial – clicking this button starts dialling to the GSM
network via GSM module 0.
• Hang up- Hangs up the cal to GSM and stops recording of
the DISA message.
GSM diagnostic
Select this item to display information on the GSM modules and
SIM cards inserted in the gateway.
Fig. 41 – Diagnostics
• Layers 2 and 3 – GSM module status on communication layers
2 and 3.
• GSM Network – name of the GSM network to which the GSM
module has logged.
• Network ID – network MCC+MNC / GSM outgoing group
number / GSM incoming group number. This parameter also
specifies the cause of a GSM channel error if any.
• GSM cell – identifies the cell to which the GSM module has
logged.
Description of displayed numbers:
Network cell: A,BBB,CCC,DDDDD
76