2N VoiceBlue Lite - Manual v2.6 - Manual (Page 89)

2N - VoiceBlue Lite
• PIN – enter the PIN code to be entered for new SIM cards
automatically. The PIN codes of once inserted SIM cards are
remembered.
• End of dialling – enter the character to be used as end of
dialling to VoIP network.
• Mobility extension (DTMF settings) – this section defines the
functional keys of the service mobility extension. We
recommend that the fields in this section be left at their default
values
• Start dialling (quick call forwarding) – serves to define
the DTMF numerals of the attribute which will be
allocated to the telephone number to which the calls
should be rerouted during quick call forwarding (see
chapter 6.3)
• End of dialling (quick call forwarding) – serves to define
the DTMF numerals of the attribute which will mark the
end of dialling (see chapter 6.3)
• Hold call – this combination of DTMF numerals allows
the mobile subscriber to put the call in the HOLD mode.
• Hang up call - this combination of DTMF numerals
allows the mobile subscriber to switch the call from the
HOLD mode to the call mode or end an ongoing call.
• “Follow me” activation – combination of DTMF
selection for activating the rerouting of call to the GSM
network if the participant in the VoIP network is not
available (see Fig. 19)
• “Follow me” deactivation – combination of DTMF
selection for cancelling rerouting of call to GSM network
if the participant in the VoIP network is not available (see
Fig. 19)
• “SMS at no answer” activation – combination of DTMF
selection for activating the sending of a text message
when a call is not taken (see Fig. 20)
• “SMS at no answer” deactivation – combination of
DTMF selection for cancelling the sending of a text
message when a call is not taken (see Fig. 20)
79